Triumph Motorcycle Scrambler The Hunter

💡

triumph-motorcycle-scrambler-the-hunter



The Triumph Scrambler’s biggest selling point is its looks. It might not be the strongest contender in the performance department, but it has a nostalgic appeal that few others can match. And it’s easy to upgrade.

triumph-motorcycle-scrambler-the-hunter
This stunning Triumph Scrambler was built by Erne’s Euromotos—a dealership and custom shop in Zürich, Switzerland. It’s the perfect blueprint for anyone wanting to transform his or her own Scrambler with performance-based mods.

























The engine gets a big power boost via larger valves, hotter cams, and a higher compression ratio. To increase airflow, Erne’s modified the air box, fitted a free-flowing filter, and installed a Zard exhaust system. The fuel injection was then remapped—making this particular Scrambler good for a reported 95hp.


triumph-motorcycle-scrambler-the-hunter
Given this significant jump in power, suspension and braking upgrades were in order. A Brembo P4 braking setup was added at the front, along with a Galfer disc designed for the Thruxton.



























Öhlins suspension components were set up at both ends: FG324 upside-down forks at the front, and S36P shocks out back. The forks are held in place by new triple trees from LSL, and the tires are Continental’s dual-sport-specific TKC80s.

triumph-motorcycle-scrambler-the-hunter

























LSL also supplied a set of X01 Superbike bars, bar risers, and adjustable clutch and brake levers. Other (less obvious) LSL parts include a chain guard, sprocket cover, main and passenger foot pegs and foot controls. The regulator, ignition and horn have all been relocated to clean up the front end as much as possible.

triumph-motorcycle-scrambler-the-hunter

























Erne’s dipped into the JvB-moto catalogue too—fitting a JVB headlight, side panels and rear fender. A Motogadget Motoscope Tiny speedo was installed via Motogadget’s m-TRI: a signal adapter designed specifically for plugging Motogadget components into modern Triumphs with minimal fuss. The bar-end turn signals are Motogadget’s m-Blaze Discs.

triumph-motorcycle-scrambler-the-hunter
























After a little back-and-forth on paint, the client settled on a satin olive green for the tank and fender. The Triumph emblem on the tank and Erne’s logos on the side panels were done in gold, taking cues from the distinctive Öhlins components. Gold highlights can be found elsewhere too: like the adjustment dials on the levers.
triumph-motorcycle-scrambler-the-hunter
Rounding off the bike is a slimmer, shorter seat with custom upholstery.
The diamond-stitch pattern has been created with a green thread that’ll darken over time to match the tank. That pattern  is replicated on the grips—a pair of Biltwell Thrusters—which is typical of the well-considered detailing on this project.






























The Scrambler’s brawny stance and olive finish have earned it the moniker Le Chasseur(‘The Hunter’). A fitting name for a Scrambler that’s right on target.
triumph-motorcycle-scrambler-the-hunter

Comments

Post a Comment

Popular posts from this blog

Street tracker Honda magna

💡
Image
 Ever heard of the V30 Magna? It was a 498 cc V-four cruiser that Honda released in the 80s, In 1984, Honda unveiled the VF500C, better known as the V30 Magna ☁️ a potent 500cc cruiser whose sophisticated V4 powerplant boasted technology carried over from Honda’s famed V4 racing engines: double overhead cams, four valves per cylinder, liquid cooling, six-speed gearbox, and more. In fact, the same engine was used in the bike’s sportbike sibling, the VF500F Interceptor. In print ads for the new bike, Honda made sure everyone knew this was not your run-of-the-mill middleweight cruiser  ‘custom’ styling typical of the era. Not surprisingly, you don’t see many custom examples—so when Sean Skinner at motorelic in Virginia got his hands on one, he had nothing to reference for inspiration. That didn’t stop him from building a sharp  street tracker  that’s miles ahead of the source material. Sean’s V30 is also something of a parts bin special, with an Interceptor swing arm, CBR600F2 forks and w
Read more

The Ducati Scrambler

💡
Image
   As the Wheels & Waves competition winds down, gorgeous new custom builds area unit still being undraped in Biarritz. the most recent is that this Ducati Scrambler referred to as ‘Magione,’ from Belgium’s Fred ‘Krugger‘ Bertrand. Krugger has 2 AMD World Championship titles to his name, and he’s best-known for building cleaner-than-factory bikes. He backs up his craft with wonderful attention to detail, this Scrambler is loaded with touches that every one however a keen eye. They were happy for Krugger to interpret the look but he saw match. thus he opted to retain the Scrambler’s core vibe but crank it up to eleven. This meant keeping the initial teardrop tank enhancing instead of substitution it. thus he unscrewed the tank’s aspect panels, bring to a halt the mounting brackets, and smoothened everything off. He’s additionally tweaked the Scrambler’s stance by dropping the front fork a hair beneath 2 inches. Further back could be a handsewn steel tail unit moun
Read more

Customs motorcycle make over

💡
Image
That tradition is alive and well, and this custom-built machine destined for small-run production is the latest example. The ‘Engrich ART’ motorcycle is powered a fully balanced, 1200cc 360° parallel twin. It’s the only engine of its type in the world, we’re told, and uses a ‘reciprocating tungsten balance system’. Gets a make over from the Austrian shop NCT. Plus news of a Ducati Scrambler design contest, and a bespoke luxury roadster from New Zealand. The project started 20 years ago, and after sustained engine and chassis development, the first complete motorcycle was built last year. The chassis has over 200 anodized and CNC-machined components, uses 6061 aluminum, and is hooked up to Öhlins suspension. The fuel tank is machined from billet aluminum, and 3D printed nylon is used for the air box body, air intake, tank cowlings and rear seat cowl assembly. They  a lare has long tradition of bike building and engineering ingenuity, and uses a aluminum. No pricing has been announced ye
Read more